Item Description

• Same shell as used in the MVP2500 series helmets
• Economical Dual Density foam liner
• Padding is not removable
• Fits Hat Sizes: 7" - 7 1/2"
• SEI Certified
• NOCSAE Certified
• MVP2400

• Reduced wight and larger UltraCool vent holes
• Wedged ab pads dampen and deflect balls downward
  
• Sternum, throat, and moldable collar bone PE plates
• Adjustable shoulder cap
• Low rebound memory foam
  
• Wraparound sides
• DeltaFlex harness
• AEGIS Microbe Shield
• Rcommended for ages 16-18
  
• 16.5 inch design
• SEI Certified
• Meets NOCSAE Standard
• CPCC1618S7X

• Extra strong knee caps for longer wear
• Rivet free padding
• Triple knee design
• Gel Tech Foam knee pad
• Removable second toe
• High Impact plastic
• 16.5 inch design
• LG21WPRO
• 
  

Reviews

Fit Guide

• Please note, the "fit" from one manufacturer to the next may differ
• Age is not always indicative of the correct size needed, but more times than not is accurate
• At times, sizes will overlap in the charts below. This can be due to the different manufacturers sizing. Be sure to size accordingly
• Generally, catcher's gear designed for Tee Ball, Jr Youth, or Youth play are gender neutral as far as the fit is concerned
  

• Place a measuring tape around your head, just above the ears where your hat would naturally rest
• Take the total circumference (distance around) in inches and reference the chart below
• This measurement will determine your "Fitted Hat Size" which is how catchers helmets are sized
• For example, if you measured 22 ¾", then your fitted hat size is 7 ¼"
• Each individual helmet's size range will be provided in the Item Description
  
• Typically, there are two sizes of catchers helmets available:
  
• Youth (Small)
  
• Most Youth helmets are generally sized between: 6 1/8" - 7" (Individual sizes may vary)
• Adult (Large)
• Most Adult helmets are generally sized between: 7" - 7 3/4" (Individual sizes may vary)

• Using the illustration above, you will measure from the center of your collarbone to bottom of your torso (natural waist line)
• The overall length (inches) will determine which size will work best
• Each individual chest protector's size will be provided in the Item Description
• The chart below will provide an approximate recommendation based on size and age
• This chart is not exact. Your personal measurements should outweigh the chart below*
  

• Using the illustration above, you will measure from the middle of your knee cap to the top of your ankle
• The overall length (inches) will determine which size will work best
• Each individual leg guard's size will be provided in the Item Description
• The chart below will provide an approximate recommendation based on size and age
• This chart is not exact. Your personal measurements should outweigh the chart below*
  

• Knee Savers are recommended by overall height
• Small:
• 5' 7" and below
• Large:
• 5' 8" and up
  
"Back to Top